Beckoning Beauty Tie-back Dress (Mint)
DESIGNED AND MADE BY THE THREAD THEORY
- Material: quality cotton linen blend
- Fully lined
- Non sheer
- Adjustable tie back straps
- Padded at bust
- Elasticised at waist
- Elasticised at sleeves
- Side zip
GARMENT CARE:
- Cold temperature: 20 degrees
- Handwash most preferred to keep in shape. For machine wash, put in mesh bag: Gentle wash cycle with low spin mode (400)
- No dryer
- Treat stains before washing. Avoid detergents that combine stain removal and washing.
- Always opt for gentle detergents: Mild fragrance, non-fragrance and baby-safe ones
- Read our full Garment Care
| XS | S | M | L | XL | XXL | |
| PIT TO PIT |
14" to 15" |
15" to 16" |
16" to 17" |
17" to 18" |
18" to 19" |
19" to 20" |
|
WAIST |
12" to 12.5" |
13" to 13.5" |
14" to 14.5" |
15" to 15.5" |
16" to 16.5" |
17" to 17.5" |
|
LENGTH |
45.25" | 45.75" | 46.25" | 46.75" | 47.25" | 47.75" |
Measurements in inches. 1 inch = 2.54cm (Convert here)
Model: UK 6, 174cm, PTP 15", Waist 11.5", Wears Size XS
For this design: Backless designs' measurements tend to be slightly smaller for a more snug fit at the back (Eg. PTP 14.5" fits PTP 14" for backless designs). Stick to your usual sizing for The Thread Theory. If you are in-between sizes, you can size down but do ensure that your measurements are still within the stretch range for the chosen size.
General Guide: Measurements are taken across an apparel at respective areas. Multiply by 2 for circumference measurements. Range in measurement reflects the material stretch, with the smallest approximate measurement taken when an apparel is laid flat and unstretched, and the largest approximate measurement is taken when an apparel is stretched to its maximum. We do not recommend using the maximum stretch measurement as reference as some allowance is required for comfort and movement.
How to take measurements: When measuring apparels, we recommend laying the item completely flat and measuring just across the respective area. However, when measuring your body, we recommend measuring the whole circumference and then divide by 2 to compare with the product measurements. For example, to get your PTP measurement, measure the whole circumference of your armpit area (above bust line) and then divide by 2. Please note that PTP is NOT the same as bust which is taken across the broadest part of your chest.
