Romance In A Wrap Dress (Wine Red)
DESIGNED AND MADE BY THE THREAD THEORY
- Material: Satin Polyester
- Fully functional wrap dress
- Functional pockets
- Flutter sleeves
- Fully lined, non-sheer
- There may be slight colour variations across different designs with the same colour name due to different batches of fabric being used.
NOTE: Due to the delicate nature of our satin polyester fabrics, extra care should be taken when trying the dress. One should refrain from wearing it with accessories (e.g. jewellery or hand bags with sharp / metal edges) where the fabric can be easily hooked on.
GARMENT CARE
- Turn clothes inside out. Cold temperature: 20 degrees
- Machine wash, put in mesh bag: Gentle wash cycle with low spin mode (400)
- No dryer
- Treat stains before washing. Avoid detergents that combine stain removal and washing.
- Always opt for gentle detergents: Mild fragrance, non-fragrance and baby-safe ones
- Read our full Garment Care
| XS | S | M | L | XL | XXL | XXXL | |
| PIT TO PIT |
14.5" to 16" |
15.5" to 17" |
16.5" to 18" |
17.5" to 19" |
18.5" to 20" |
19.5" to 21" |
20.5" to 22" |
| WAIST |
12" to 13" |
13" to 14" |
14" to 15" |
15" to 16" |
16" to 17" |
17" to 18" |
18" to 19" |
|
SHOULDERS |
13.75" | 14.25" | 14.75" | 15.25" | 15.75" | 16.25" | 16.75" |
|
SLEEVE |
9.5" | 10" | 10.5" | 11" | 11.5" | 12" | 12.5" |
|
LENGTH |
53.5" | 54" | 54.5" | 55" | 55.5" | 56" | 56.5" |
Model: UK6 to 8, 174cm, PTP 15.5", Waist 12. Wears Size S with slight allowance at waist.
For this design: Sleeved designs' PTP measurements need to be slightly bigger for allowance and comfort (Eg. PTP 14.5" fits PTP 15"-15.5" for sleeved designs). Stick to your usual sizing for The Thread Theory.
General Guide: Measurements are in inches and taken across an apparel at respective areas. Multiply by 2 for circumference measurements. Range in measurement reflects the material stretch, with the smallest approximate measurement taken when an apparel is laid flat and unstretched, and the largest approximate measurement is taken when an apparel is stretched to its maximum. We do not recommend using the maximum stretch measurement as reference as some allowance is required for comfort and movement.
How to take measurements: When measuring apparels, we recommend laying the item completely flat and measuring just across the respective area. However, when measuring your body, we recommend measuring the whole circumference and then divide by 2 to compare with the product measurements. For example, to get your PTP measurement, measure the whole circumference of your armpit area (above bust line) and then divide by 2. Please note that PTP is NOT the same as bust which is taken across the broadest part of your chest.
