La Vie Boheme Dress (White)
DESIGNED AND MADE BY THE THREAD THEORY
Made of quality textured polyester:
- Keyhole-tie neckline
- Functional pockets
- Elasticised ruffled hem sleeves that can be tucked in for a clean, puff-sleeve look
- Meant to be worn loose-fit and oversized
- Concealed back zip
- Fully lined
- Non sheer (nude undergarments recommended for white apparels nonetheless)
GARMENT CARE
- Turn clothes inside out. Cold temperature: 20 degrees
- Machine wash, put in mesh bag: Gentle wash cycle with low spin mode (400)
- No soaking. No dryer.
- Treat stains before washing. Avoid detergents that combine stain removal and washing.
- Always opt for gentle detergents: Mild fragrance, non-fragrance and baby-safe ones
- Read our full Garment Care
| XS | S | M | L | XL | XXL | |
| PIT TO PIT |
19" to 20" |
20" to 21" |
21" to 22" |
22" to 23" |
23" to 24" |
24" to 25" |
|
LENGTH |
44.5" |
45" |
45.5" |
46" |
46.5" |
47" |
Measurements in inches. 1 inch = 2.54cm (Convert here)
Model: UK 6 to 8, 175cm, PTP 15.5" , Waist 12". Wears Size S with allowance at waist.
For this design: Batwing designs' measurements are bigger due to the nature of the cutting (Eg. PTP 14.5" fits PTP 17"-21" for batwing designs depending on the degree of the batwing). If you are in-between sizes, you can size down but do note that this dress is meant to be worn loose-fit oversized.
General Guide: Measurements are taken across an apparel at respective areas. Multiply by 2 for circumference measurements. Range in measurement reflects the material stretch, with the smallest approximate measurement taken when an apparel is laid flat and unstretched, and the largest approximate measurement is taken when an apparel is stretched to its maximum. We do not recommend using the maximum stretch measurement as reference as some allowance is required for comfort and movement.
How to take measurements: When measuring apparels, we recommend laying the item completely flat and measuring just across the respective area. However, when measuring your body, we recommend measuring the whole circumference and then divide by 2 to compare with the product measurements. For example, to get your PTP measurement, measure the whole circumference of your armpit area (above bust line) and then divide by 2. Please note that PTP is NOT the same as bust which is taken across the broadest part of your chest.
