Hour To Shine Tube Dress (Light Pink)
DESIGNED AND MADE BY THE THREAD THEORY
Made of quality Satin Polyester:
- Pleated details at bust
- Anti-slip at bust
- Front side slit
- Back inner hook
- Concealed back zip
- Fully lined
- Non-sheer
- There may be slight colour variations across different designs with the same colour name due to different fabric being used
NOTE: Due to the delicate nature of our satin polyester fabrics, extra care should be taken when trying the dress. One should refrain from wearing it with accessories (e.g. jewellery or hand bags with sharp / metal edges) where the fabric can be easily hooked on.
GARMENT CARE
- Turn clothes inside out. Cold temperature: 20 degrees
- Ensure zips/hooks are fastened, beware of your accessories which can cause thread run
- Machine wash, put in mesh bag: Gentle wash cycle with low spin mode (400)
- No soaking. No dryer.
- Treat stains before washing. Avoid detergents that combine stain removal and washing.
- Always opt for gentle detergents: Mild fragrance, non-fragrance and baby-safe ones
- Read our full Garment Care
| XXS | XS | S | M | L | XL | XXL | |
| PIT TO PIT |
12.5" to 13.25" |
13" to 13.75" |
14" to 14.75" |
15" to 15.75" |
16" to 16.75" |
17" to 17.75" |
18" to 18.75" |
| WAIST |
12" |
12.5" |
13.5" |
14.5" |
15.5" |
16.5" |
17.5" |
|
HIPS |
17.5" to 18.25" |
18" to 18.75" |
19" to 19.75" |
20" to 20.75" |
21" to 21.75" |
22" to 22.75" |
23" to 23.75" |
|
LENGTH |
46.75" | 47" | 47.25" | 47.5" | 47.75" | 48" | 48.25" |
Measurements in inches. 1 inch = 2.54cm (Convert here)
Model: UK 6, 177cm, PTP 14.75", Waist 11.5", Wears Size XS with slight allowance at waist.
For this design: Stick to your usual sizing for The Thread Theory. Tube designs' PTP measurements tend to be smaller for a more snug fit to prevent the dress from sliding down when worn (Eg. PTP 14.5" fits PTP 13.5” to 14" for tube designs). Stick to your usual sizing for The Thread Theory. If you are in-between sizes, you can size up but do ensure that your waist and hips measurements (if available) are still within the stretch range for the chosen size.
General Guide: Measurements are taken across an apparel at respective areas. Multiply by 2 for circumference measurements. Range in measurement reflects the material stretch, with the smallest approximate measurement taken when an apparel is laid flat and unstretched, and the largest approximate measurement is taken when an apparel is stretched to its maximum. We do not recommend using the maximum stretch measurement as reference as some allowance is required for comfort and movement.
How to take measurements: When measuring apparels, we recommend laying the item completely flat and measuring just across the respective area. However, when measuring your body, we recommend measuring the whole circumference and then divide by 2 to compare with the product measurements. For example, to get your PTP measurement, measure the whole circumference of your armpit area (above bust line) and then divide by 2. Please note that PTP is NOT the same as bust which is taken across the broadest part of your chest.
