Beachcomber Skirt (White)
DESIGNED AND MADE BY THE THREAD THEORY
Made of quality Linen:
- Shell side buttons
- Concealed back zip
- Side slit
- Fully lined
- Very slight sheer for white but fine with nude undergarments
NOTE: Due to the natural characteristics of the fabric, slight variations in texture, including uneven threads and subtle imperfections, may be present.
Purchase together with Shell Belle Top at a set price of $68.90 (U.P $75.90). Discount will be automatically applied at the check-out page.
GARMENT CARE
- Turn clothes inside out. Cold temperature: 20 degrees
- Hand-wash highly preferred over machine wash. Don’t wring, twist or scrub as it can stretch fabric and/or cause hard creases.
- Washing machine: Comes with risk but best practice is listed under Point 6 of our Garment Care
- No soaking. No dryer.
- Treat stains before washing. Avoid detergents that combine stain removal and washing.
- Always opt for gentle detergents: Mild fragrance, non-fragrance and baby-safe ones
| XXS | XS | S | M | L | XL | XXL | |
|
WAIST |
11.5" |
12" |
13" |
14" |
15" |
16" |
17" |
|
HIPS |
17.5" to 18" |
18" to 19" |
19" to 20" |
20" to 21" |
21" to 22" |
22" to 23" |
23" to 24" |
|
LENGTH |
34.75" | 35" | 35.5" | 36" | 36.5" | 37" | 37.5" |
Measurements in inches. 1 inch = 2.54cm (Convert here)
Model: UK 6, 160cm, PTP 14.75", Waist 11.5", Wears Size XS with slight allowance at waist.
For this design: Smocked range measurements start smaller as it is highly stretchable. Stick to your usual sizing for The Thread Theory. If you are in-between sizes, you can size down but do ensure that your measurements are still within the stretch range for the chosen size.
General Guide: Measurements are taken across an apparel at respective areas. Multiply by 2 for circumference measurements. Range in measurement reflects the material stretch, with the smallest approximate measurement taken when an apparel is laid flat and unstretched, and the largest approximate measurement is taken when an apparel is stretched to its maximum. We do not recommend using the maximum stretch measurement as reference as some allowance is required for comfort and movement.
How to take measurements: When measuring apparels, we recommend laying the item completely flat and measuring just across the respective area. However, when measuring your body, we recommend measuring the whole circumference and then divide by 2 to compare with the product measurements. For example, to get your PTP measurement, measure the whole circumference of your armpit area (above bust line) and then divide by 2. Please note that PTP is NOT the same as bust which is taken across the broadest part of your chest.
