Ribbonaire Dress (Black)
DESIGNED AND MADE BY THE THREAD THEORY
Made of quality Viscose:
- Triple ribbon-tie sleeves with bottom drawstrings
- Sleeves can be worn multiple ways:
- Flutter sleeves (Extend drawstring)
- Puff sleeves (Tighten drawstring)
- Off shoulder
- Hide the bottom drawstring for a 2-ribbon look - Panelled empire bust
- Elasticised shoulders
- Smocked back
- Functional pockets
- Exposed zip
- Fully lined
- Non-sheer
GARMENT CARE
- Turn clothes inside out. Cold temperature: 20 degrees
- Machine wash, put in mesh bag: Gentle wash cycle with low spin mode (400)
- No dryer
- Treat stains before washing. Avoid detergents that combine stain removal and washing.
- Always opt for gentle detergents: Mild fragrance, non-fragrance and baby-safe one
- Read our full Garment Care
| XS | S | M | L | XL | XXL | |
| PIT TO PIT |
13.25" to 14.25" |
14.25" to 15.25" |
15.25" to 16.25" |
16.25" to 17.25" |
17.25" to 18.25" |
18.25" to 19.25" |
| UNDERBUST |
11.75" to 12" |
12.75" to 13" |
13.75" to 14" |
15.75" to 15" |
16.75" to 16" |
17.75" to 17" |
|
LENGTH |
45" | 45.5" | 46" | 46.5" | 47" | 47.5" |
Measurements in inches. 1 inch = 2.54cm (Convert here)
Model: UK 6 to 8, 175cm, PTP 15.5", Waist 12.25", Wears Size S.
For this design: Cutting runs slightly smaller for this design, you may size up if you are in between sizes but do refer to the measurements for a more accurate gauge.
General Guide: Measurements are taken across an apparel at respective areas. Multiply by 2 for circumference measurements. Range in measurement reflects the material stretch, with the smallest approximate measurement taken when an apparel is laid flat and unstretched, and the largest approximate measurement is taken when an apparel is stretched to its maximum. We do not recommend using the maximum stretch measurement as reference as some allowance is required for comfort and movement.
How to take measurements: When measuring apparels, we recommend laying the item completely flat and measuring just across the respective area. However, when measuring your body, we recommend measuring the whole circumference and then divide by 2 to compare with the product measurements. For example, to get your PTP measurement, measure the whole circumference of your armpit area (above bust line) and then divide by 2. Please note that PTP is NOT the same as bust which is taken across the broadest part of your chest.
