Twine And Define Dress (White)
DESIGNED AND MADE BY THE THREAD THEORY
Made of quality Knit Neoprene Blend:
- Sleeves can be worn 2 ways:
On and off the shoulder - Square neckline
- Elasticised shoulders
- Concealed back zip
- Slight sheer (nude undergarments recommended)
GARMENT CARE
- Always turn clothes inside out, ensure zips and hooks are fastened
- Cold temperature: 20 degrees
- Hand-wash highly preferred over machine wash. Don’t wring, twist or scrub as it can stretch fabric and/or cause hard creases.
- Washing machine: Comes with risk but best practice is listed under Point 6 of our Garment Care
- No soaking. No dryer.
- Treat stains before washing. Avoid detergents that combine stain removal and washing.
- Always opt for gentle detergents: Mild fragrance, non-fragrance and baby-safe ones
- Read our full Garment Care
| XS | S | M | L | XL | XXL | |
| PIT TO PIT |
14" to 16" |
15" to 17" |
16" to 18" |
17" to 19" |
18" to 20" |
19" to 21" |
|
WAIST |
12.5" to 14.5" |
13.5" to 15.5" |
14.5" to 16.5" |
15.5" to 17.5" |
16.5" to 18.5" |
17.5" to 19.5" |
|
HIPS |
16" to 18" |
17" to 19" |
18" to 20" |
19" to 21" |
20" to 22" |
21" to 23" |
|
LENGTH |
44" |
44.5" |
45" |
45.5" |
46" |
46.5" |
Measurements in inches. 1 inch = 2.54cm (Convert here)
Model: UK 6, 174cm, PTP 15", Waist 11.5", Wears Size XS
For this design: Stick to your usual sizing for The Thread Theory. Due to the stretchy nature of the fabric, PTP 14.5” will be able to fit 14” for this dress.
General Guide: Measurements are taken across an apparel at respective areas. Multiply by 2 for circumference measurements. Range in measurement reflects the material stretch, with the smallest approximate measurement taken when an apparel is laid flat and unstretched, and the largest approximate measurement is taken when an apparel is stretched to its maximum. We do not recommend using the maximum stretch measurement as reference as some allowance is required for comfort and movement.
How to take measurements: When measuring apparels, we recommend laying the item completely flat and measuring just across the respective area. However, when measuring your body, we recommend measuring the whole circumference and then divide by 2 to compare with the product measurements. For example, to get your PTP measurement, measure the whole circumference of your armpit area (above bust line) and then divide by 2. Please note that PTP is NOT the same as bust which is taken across the broadest part of your chest.
